Tascam us-1x2 Usb HR 2.0 Lydkort

995,00 DKK
( 796,00 DKK )

Tascam US-1x2 USB HR 2.0 Audio interface

US-1x2 er en 1-input/4-output USB lyd/MIDI-interface perfekt til nybegyndere. Den tilbyder seriøse optagelsesegenskaber med 96 kHz/24-bit kvalitet med brugervenligheden i højsædet. Mic preamps er nøglen til sublim lydkvalitet og US-1x2 tilbyder Ultra-HDDA mic-preamps med 125 dBu EIN rating som betyder den har et meget lavt støjniveau. Pågrund af den brede dynamiske vidde kan interfacen både bruges sammen med dynamiske og kondensatormikrofoner. Dette gør enheden optimal til optagelse af vokal, piano og akustiske guitarer. US-2x2 kan benyttes sammen med DAW-applikationer, den kan også benyttes som en lyd-interface med iPads og andre populære iOS-enheder, ved brug af en Apple Lightning-to-USB kamera-adapter (en ekstra AC-adapter er nødvendig når US-2x2 benyttes sammen med iOS-enheder).

Model/varenr.: WSHOP-2653

Specifikationer

General 
Sampling frequencies   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz  
Quantization bit depth   16/24 bits  

Analogue audio inputs 
Mic input (balanced, IN1)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)  
  Input impedance   2.4 kΩ  
  Nominal input level (gain knob at max.)   −65 dBu (0.0004 Vrms)  
  Nominal input level (gain knob at min.)   −8 dBu (0.0775 Vrms)  
  Maximum input level   +8 dBu (1.9467 Vrms)  
  Maximum gain   57 dB  
Line/instrument input (balanced/unbalanced, IN2)   6.3-mm standard TRS stereo jack 
(Tip: HOT, Ring: COLD, Sleeve: GND)  
  When set to LINE (balanced)      
  Input impedance   10 kΩ  
  Nominal input level (gain knob at max.)   −41 dBu (0.0069 Vrms)  
  Nominal input level (gain knob at max.)   +4 dBu (1.228 Vrms)  
  Maximum input level   +20 dBu (7.75 Vrms)  
  Maximum gain   45 dB  
  When set to INST (unbalanced)      
  Input impedance   ≥1 MΩ  
  Nominal input level (gain knob at max.)   −51 dBV (0.0028 Vrms)  
  Nominal input level (gain knob at max.)   –6 dBV (0.5015 Vrms)  
  Maximum input level   +4 dBV (1.584 Vrms)  
  Maximum gain   45 dB  
Line input L/R (unbalanced)   RCA  
  Input impedance   10 kΩ  
  Maximum input level   +10 dBV (3.162 Vrms)  

Analogue audio outputs 
Line output L/R (unbalanced)   RCA  
  Output impedance   100 Ω  
  Maximum output level   +6 dBV (1.995 Vrms)  
Headphones output   6.3-mm standard stereo jack  
  Maximum output power   18 mW + 18 mW or higher
(THD+N 0.1% or less, 32 Ω)  

Other inputs and outputs 
USB   4-pin USB B-type  
  Transfer rate   USB 2.0 Hi-speed (480 Mbits/s)  
Power supply (DC IN 5V)   USB Micro B type  

Audio performance 
Mic preamp EIN (equivalent input noise)   −127 dBu or less
(150 Ω termination, gain knob at max.)  
Frequency response (input to line or headphones* output)  
  44.1/48 kHz   20 Hz: +0/−0.5 dB (JEITA)
20 kHz: +0/–0.5 dB (JEITA)
20 kHz: +0/–1 dB* (JEITA)  
  88.2/96 kHz   20 Hz: +0/−0.5 dB (JEITA)
40 kHz: +0/−1.0 dB (JEITA)
40 kHz: +0/–3.0 dB* (JEITA)  
S/N ratio   100 dB or higher 
(22-kHz LPF, A-weighted, line input to line output, gain knob at min., standalone mode, JEITA)  
Distortion   0.006 % or less 
(1-kHz sine wave, line input to line output, rated input level, max. output level, standalone mode, JEITA)  
Crosstalk   95 dB or more 
(1-kHz sine wave, line input to line output, standalone mode, JEITA)  

Host computer requirements 
Windows  
  Supported operating systems   Windows 10, 32 bits or 64 bits
Windows 8.1, 32 bits or 64 bits
Windows 7, 32 bits or 64 bits, SP1 or later  
  Computer hardware requirements   Windows-compatible computer with a USB 2.0 port  
  CPU/processor speed   2 GHz or faster dual core processor (x86)  
  Memory   2 GB or more  
  Supported audio drivers   ASIO 2.0, WDM  
Mac  
  Supported operating systems   macOS Sierra (10.12 or later)
OS X El Capitan (10.11 or later)
OS X Yosemite (10.10 or later)  
  Computer hardware requirements   Mac with a USB 2.0 port  
  CPU/processor speed   2 GHz or faster dual core processor  
  Memory   2 GB or more  
  Supported audio driver   Core Audio  
iOS device   iOS device running iOS 7 or later  
  Supported audio driver   Core Audio for iPhone  

Power supply and other specifications 
Power supply  
  Used with a computer   USB bus power  
  Used with an iOS device   USB power adapter (that can supply 5 V and a current of at least 700 mA)1
External battery pack (that can supply 5 V and a current of at least 700 mA)2  
Power consumption   2.5 W  
Dimensions (H × W × D, without protrusions)   146 mm × 55 mm × 120 mm  
Weight   623 g  
Operating temperature range   5–35 °C  
1 We strongly recommend using a Tascam PS-P520E or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch. To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately.  
2 We strongly recommend using a Tascam BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA.  

spacer