Tascam us-1x2 Usb HR 2.0 Lydkort
Tascam US-1x2 USB HR 2.0 Audio interface
US-1x2 er en 1-input/4-output USB lyd/MIDI-interface perfekt til nybegyndere. Den tilbyder seriøse optagelsesegenskaber med 96 kHz/24-bit kvalitet med brugervenligheden i højsædet. Mic preamps er nøglen til sublim lydkvalitet og US-1x2 tilbyder Ultra-HDDA mic-preamps med 125 dBu EIN rating som betyder den har et meget lavt støjniveau. Pågrund af den brede dynamiske vidde kan interfacen både bruges sammen med dynamiske og kondensatormikrofoner. Dette gør enheden optimal til optagelse af vokal, piano og akustiske guitarer. US-2x2 kan benyttes sammen med DAW-applikationer, den kan også benyttes som en lyd-interface med iPads og andre populære iOS-enheder, ved brug af en Apple Lightning-to-USB kamera-adapter (en ekstra AC-adapter er nødvendig når US-2x2 benyttes sammen med iOS-enheder).
Specifikationer
General
Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit depth 16/24 bits
Analogue audio inputs
Mic input (balanced, IN1) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kΩ
Nominal input level (gain knob at max.) −65 dBu (0.0004 Vrms)
Nominal input level (gain knob at min.) −8 dBu (0.0775 Vrms)
Maximum input level +8 dBu (1.9467 Vrms)
Maximum gain 57 dB
Line/instrument input (balanced/unbalanced, IN2) 6.3-mm standard TRS stereo jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
When set to LINE (balanced)
Input impedance 10 kΩ
Nominal input level (gain knob at max.) −41 dBu (0.0069 Vrms)
Nominal input level (gain knob at max.) +4 dBu (1.228 Vrms)
Maximum input level +20 dBu (7.75 Vrms)
Maximum gain 45 dB
When set to INST (unbalanced)
Input impedance ≥1 MΩ
Nominal input level (gain knob at max.) −51 dBV (0.0028 Vrms)
Nominal input level (gain knob at max.) –6 dBV (0.5015 Vrms)
Maximum input level +4 dBV (1.584 Vrms)
Maximum gain 45 dB
Line input L/R (unbalanced) RCA
Input impedance 10 kΩ
Maximum input level +10 dBV (3.162 Vrms)
Analogue audio outputs
Line output L/R (unbalanced) RCA
Output impedance 100 Ω
Maximum output level +6 dBV (1.995 Vrms)
Headphones output 6.3-mm standard stereo jack
Maximum output power 18 mW + 18 mW or higher
(THD+N 0.1% or less, 32 Ω)
Other inputs and outputs
USB 4-pin USB B-type
Transfer rate USB 2.0 Hi-speed (480 Mbits/s)
Power supply (DC IN 5V) USB Micro B type
Audio performance
Mic preamp EIN (equivalent input noise) −127 dBu or less
(150 Ω termination, gain knob at max.)
Frequency response (input to line or headphones* output)
44.1/48 kHz 20 Hz: +0/−0.5 dB (JEITA)
20 kHz: +0/–0.5 dB (JEITA)
20 kHz: +0/–1 dB* (JEITA)
88.2/96 kHz 20 Hz: +0/−0.5 dB (JEITA)
40 kHz: +0/−1.0 dB (JEITA)
40 kHz: +0/–3.0 dB* (JEITA)
S/N ratio 100 dB or higher
(22-kHz LPF, A-weighted, line input to line output, gain knob at min., standalone mode, JEITA)
Distortion 0.006 % or less
(1-kHz sine wave, line input to line output, rated input level, max. output level, standalone mode, JEITA)
Crosstalk 95 dB or more
(1-kHz sine wave, line input to line output, standalone mode, JEITA)
Host computer requirements
Windows
Supported operating systems Windows 10, 32 bits or 64 bits
Windows 8.1, 32 bits or 64 bits
Windows 7, 32 bits or 64 bits, SP1 or later
Computer hardware requirements Windows-compatible computer with a USB 2.0 port
CPU/processor speed 2 GHz or faster dual core processor (x86)
Memory 2 GB or more
Supported audio drivers ASIO 2.0, WDM
Mac
Supported operating systems macOS Sierra (10.12 or later)
OS X El Capitan (10.11 or later)
OS X Yosemite (10.10 or later)
Computer hardware requirements Mac with a USB 2.0 port
CPU/processor speed 2 GHz or faster dual core processor
Memory 2 GB or more
Supported audio driver Core Audio
iOS device iOS device running iOS 7 or later
Supported audio driver Core Audio for iPhone
Power supply and other specifications
Power supply
Used with a computer USB bus power
Used with an iOS device USB power adapter (that can supply 5 V and a current of at least 700 mA)1
External battery pack (that can supply 5 V and a current of at least 700 mA)2
Power consumption 2.5 W
Dimensions (H × W × D, without protrusions) 146 mm × 55 mm × 120 mm
Weight 623 g
Operating temperature range 5–35 °C
1 We strongly recommend using a Tascam PS-P520E or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch. To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately.
2 We strongly recommend using a Tascam BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA.
